|
This is a set of heavy duty 4-infrared CCD camera system with 7-inch quad view TFT LCD digital monitor to assist you in your daily driving. It gives you a complete view and ability to assess the surrounding of your vehicle in real-time.
Supports both 12V and 24V vehicles.
18-Months Australian warranty coverage.
Note: This set is a 4-infrared CCD camera system. Please follow the link below for other variations.
http://www.ebay.com.au/itm/232072326213(3-infrared CCD camera system)
http://www.ebay.com.au/itm/232072336607(2-infrared CCD camera system)
All buyers, kindly note:
• Please ask installer to bench test monitor and cameras to ensure it is in working condition before installation.
International buyers (i.e. shipping outside Australia), please note:
• Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
• Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. |
Infrared CCD Camera
| Image sensor |
Full colour SONY® CCD |
| Casing |
Heavy duty alloy |
| Casing protection rating |
- IP68
- Waterproof and dustproof
- Submersible up to 1-meter (3-feet) |
| TV system |
NTSC / PAL |
| Horizontal resolution |
420 TV lines |
| Effective pixels |
NTSC: 512 x 492 pixels
PAL: 512 x 582 pixels |
| Optical size |
1/3: 4.9 mm x 3.7 mm |
| Minimum illumination |
- 1.0 lux/F=1.2
(0 lux with active infrared turned on)
- Works in pitch black condition |
| Viewing angle |
120 degree |
| Night vision |
10 meters |
| Video output |
4-Pin connector, 1.0Vp-p/75Ω |
| Power consumption |
50-60 mA, maximum 300mA with infrared turned on |
| Power supply |
- DC 12V ~ 24V
- Suitable for car, caravan, bus, van, truck, trailer, motorhome, etc.
- Sourced from 7-inch monitor power adapter via 4-Pin connector |
| Operating temperature |
-20°C ~ 60°C, RH 95% max. |
| Storage temperature |
-40°C ~ 68°C, RH 95% max. |
7-inch High resolution digital TFT LCD monitor
| Screen size |
- 7" (diagonal)
- With detachable sunshade |
| Split-screen |
- Supports 2, 3 & 4 screen mode
- Note: The number of split screen views you get depends on the number of camera(s) installed |
| Auto-switching full-screen mode |
Auto-switching full-screen trigger wire enables you to view selected camera on a full-screen mode before switching back to the previous state:
- For example, the monitor is on 4-split screen mode and you engaged into reversing gear. The screen will then automatically switches to a full-screen rear camera mode for a bigger and clearer picture. This can be achieved by connecting the trigger wire to reversing light positive wire or it’s fuse box.
- Alternatively, you can also connect the trigger wire to turn signal or manually control the trigger wire by connecting it to an on/off switch. |
| TV system |
NTSC / PAL (auto switch) |
| Screen resolution |
800 x 480 pixels |
| Effective viewing area |
(H) x (V) : 156 mm x 88 mm |
| Gamut display |
NTSC 60% |
| Power supply |
- DC 12V ~ 24V
- Suitable for car, caravan, bus, van, truck, trailer, motorhome, etc.
- 4-Pin power adapter also supplies power to cameras |
| Operating temperature |
-20°C ~ 70°C |
| Storage temperature |
-30°C ~ 80°C |
Industry standard 4-Pin cable
| Housing and knurled nut |
- Brass and nickel-plated
- Suitable for all weather conditions |
| Waterproof |
Using threaded fittings plug and socket ensures every connection is watertight |
| Internal housing |
- Bakelite
- Heat resistant and extremely durable |
| Insulation |
- PVC
- Provides good shielding from flame, moisture and corrosion resistant |
| Conductor |
- Copper wire
- IACS approved copper for higher conductivity and stable signal transmission
- It also provides power supply to the cameras |
|
